Product ID:AMERICAN INDUSTRIAL OIL NO 32
MSDS Date:11/19/1987
FSC:9150
NIIN:00N017799
MSDS Number: BLXPH

Emergency Phone: 800-447-8735 800-424-9300(CHEMTREC)

Info Phone: 312-856-3907

Cage: 15958

Telephone: 800 447-8735

Cage: 15958

MINERAL OIL,PETROLEUM DISTILLATES,HYDROTREATED HEAVY

CAS: 64742-54-7

RTECS: PY8035500

LD50 LC50 Mixture:LD50:(ORAL RAT) >2 G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED OR REPEATED CONTACT MAY
PRODUCE SOME IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
INGEST:IF LARGE AMOUNT IS SWALLOWED, INDUCE VOMITING, GET MD.
INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .

Flash Point Method:COC
Flash Point:390F,199C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARD (E.G. DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE REQUIRED FOR USUAL CONDITIONS OF USE.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Spec Gravity:0.88
Solubility in Water:NEG, BELOW 0.1%
Appearance and Odor:EXTRA PALE-COLORED OILY LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE BURNING CAN PRODUCE CO
AND/OR CO*2 AND OHTER HARMFUL PRODUCTS.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION IS RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.